새 탭에서 열립니다

리프트 브레이크가 작동하지만 하중이 계속 아래로 미끄러진다면, 원인을 어떻게 진단합니까?

브레이크 작동 후 하중 미끄러짐은 유지 토크가 하중에 완전히 전달되지 않음을 나타냅니다. 먼저 브레이크 자체가 미끄러지고 있는지 확인하세요: 라이닝 상태(마모, 유약, 오염), 스프링 힘(비상 브레이크), 공기 간극/클리어런스, 마찰 표면 상태(디스크/브레이크 휠 스코어링, 열 손상)를 점검하세요. 정격 하중에서의 제어된 정적 유지 테스트가 가장 빠른 확인 방법입니다.
Cropped logo.png

Load creep after brake application indicates that holding torque is not being fully transferred to the load. Start by confirming whether the brake itself is slipping: check lining condition (worn, glazed, contaminated), spring force (fail-safe brakes), air gap/clearance, and friction surface condition (disc/brake wheel scoring, heat damage). A controlled static holding test at rated load is often the fastest confirmation.

Next, rule out drivetrain slip that can mimic brake slip: coupling slippage, keyway damage, loose hubs, gearbox internal issues, or a drum/rope anchoring problem. If the brake locks the shaft but the load still moves, the fault may be downstream (drum, rope, reeving).

또한 VFD 리프트의 제어 타이밍을 검토하세요: 브레이크가 작동하기 전에 토크가 안정되면 일시적인 표류가 발생할 수 있습니다. 교정 조치는 근본 원인을 해결해야 하며, 설계 한계와 안전 계수를 확인하지 않고 ‘조이기만 하면 잡는다’는 방식은 피하세요.

견적 요청

메시지를 남겨 주세요. 12시간 이내에 답변 드리겠습니다.